Режим работы пункта самовывоза:

Пн-пт 10:00-21:00, сб-вс 10:00-19:00.

Колл-центр работает с 10 до 18 по будням.

Что-то заинтересовало? Звоните!

+7 (495) 133-87-60

Неудобно звонить? 
Напишите!

Пропеллер карбоновый 9x3 T-Motor (пара)

Артикул: 5657
Есть в наличии
2400 руб
1300 руб
добавить к сравнению перейти к сравнению
  • Описание
  • Характеристики
  • Отзывы (7)

Комплект (пара) карбоновых пропеллеров T-Motor для коптера (квадрокоптера, гексакоптера, октокоптера и пр)

Идеально подходит для квадрокоптера DJI Phantom вместо стандартных пропеллеров.

Материал: Карбон (carbon fiber)

Длина: 9"

Шаг: 3"

Вес одного пропеллера: 5.7 гр

Вес: 5.7 г
Длина: 9"
Материал: карбон
Производитель: T-Motor
Шаг: 3"
  • 09.11.2017 19:45
    "These definitely add extra stability to my phantom. The downside is that they are much more rigid so if they hit anything, they break or crack. I also had some crack inside of a hard case - I should have taken them off before traveling with the case. Otherwise, really well balanced and helpful for adding stability.

    One more side note, the packaging is a little overkill, they come with these velvet bags which seem to be unnecessary and probably add to the expense slightly."
    Оценка:
  • 09.11.2017 19:45
    "I used the T-Motors Carbon fiber to upgrade from the stock props on my Phantom 1. They are a ""must have"" upgrade. They do improve the flight time and maneuvering. I also upgraded the stock motors to the T-Motos Anty Gravity and together alone, they give me between 2 to 3 minutes in additional flight time without having to improve the battery capacity.

    Many reviews question the benefits of upgrading with T-Motos and props. I can tell you by my own experience that they DO IMPROVE your Phantom.

    Invest in quality!!!"
    Оценка:
  • 06.11.2017 18:57
    "I recently gave these their first test with my new MN2214 T-Motors, and boy, what a difference!! Not only do these props provide the most stable flight I've seen yet, they also look amazing both IN and out of the box. The attention to quality is really apparent.

    I haven't tried them with stock motors, but I wouldn't recommend these without an upgraded set of motors due to the additional strain of the 9"" props. The T-motors are well worth the upgrade cost."
  • 04.11.2017 10:07
    I'm a country boy. I hate the word "stock." I've installed the T-Motors on 3 of my Phantoms. Love those motors, so I had to cough up the extra money for the Anti-Gravity Propellers. Out of the box, these props are presented in a way that reminds me of an Apple product: beautifully designed, packaged tastefully and well. As soon as they came in, I put them on my favorite fully loaded Phantom 2: FPV, Bluetooth, GoPro 3 and Zenmuse Gimbal. That was a big mistake. I hit the gas, my Phantom tipped over and destroyed 2 of the blades. I had the new DJI Thrust Propellers on this Phantom. It never did that. For that matter the old 9445's never did that. The Anti-Gravity Propellers do not have the lifting power of the new Thrust Propellers. That is for sure. I don't think they have the lifting power of the 9445's either. So after saying a few choice words, I ordered 2 replacement propellers and put them on my second favorite Phantom loaded only with a Zenmuse Gimbal and a GoPro 3. This Phantom 2 is now my favorite Phantom. Are they worth the money? If you break it down, the Anti Gravity Props are about twice as much as the new Thrust Propellers, so I would say yes these props are worth the money. Just don't put them on a fully loaded Phantom.
  • 04.11.2017 10:07
    "My Phantom 2 has T-Motors and Antigravity props - been flying them for a couple years now and love them. Last week, second flight of the day, started the motors and began liftoff when for some reason the drone decided to start to tip backward. Full forward on the stick resulted in no joy, it tipped over on the rear rotors and my props made this sad whacking noise on the pavement while I frantically went full back on power. I was left with just a few scratches which I smoothed out with very fine sandpaper ... but ... I figured why should I fly close to a G-note on props I'm worried about when $14 will give me peace of mind? These new props were the exact replacement I wanted, arrived on time, fit like a glove and now there's no worries, mate.
    Cheers."
    Оценка:
  • 04.11.2017 10:06
    "My Phantom 2 has T-Motors and Antigravity props - been flying them for a couple years now and love them. Last week, second flight of the day, started the motors and began liftoff when for some reason the drone decided to start to tip backward. Full forward on the stick resulted in no joy, it tipped over on the rear rotors and my props made this sad whacking noise on the pavement while I frantically went full back on power. I was left with just a few scratches which I smoothed out with very fine sandpaper ... but ... I figured why should I fly close to a G-note on props I'm worried about when $14 will give me peace of mind? These new props were the exact replacement I wanted, arrived on time, fit like a glove and now there's no worries, mate.
    Cheers."
    Оценка:
  • 03.11.2017 23:01
    I bought the t-motors antigravity motors for my Phantom 1.1.1 about 4 months ago. I hesitated to buy these props at the beginning due to the price, and went through about 4 or 5 different cheaper carbon fiber blade sets trying to find a set I liked. After some hits and misses (and a lot of balancing) I settled on a set from dslr pros that hit the sweet spot. They were a little more expensive too, but worth it. The phantom flew smooth and no jello. As a result I started thinking about getting a set of these again, only to find out they were out of stock pretty much everywhere I looked. So, I waited. Once they came back in I bought 2 sets equalling 4 blades. They came in a nice box, reminiscent of an apple product (I doubt the impressions they're trying to give is accidental) and the blades are in a velvet bag. As far as presentation goes I was impressed already. When I took the blades out of the bag and held them the look and feel of these white carbon fiber blades put me in mind of a very high end product. It made me feel (a little) better about the price. These cf blades a more flexible than any carbon blades I've had before which concerned me a little till I flew them. Absolutely perfect. Balanced right out of the box, with no gain changed needed. They fly smooth, no jello, just like the dslr blades and look very sharp, especially with the antigravity motors. The only complaint about these is that now I'm even more nervous about crashes. I'm a pretty good pilot but I still can't help feeling like I have a lot of money in the air. Because I do. Maybe after a while I'll calm down and start taking more chances to get those good aerial shots. Until then if I want to play rougher I put the cheaper blades on and deal with the reduced flight profile. All in all, my recommendation is that these are the very best right out of the box blades for your phantom, either 1 or 2. If you have a 1, these are 9 inches instead of the stock 8 and will give you a better flight profile similar to the phantom 2. If you already have a 2 these are a nice upgrade as they are lighter and stiffer than dji's stock blades. They are pricey, but so very nice.
Вы не представились
Не правильно введен e-mail
нам интересно Ваше мнение о товаре
CAPTCHAОбновить изображение
Вы неправильно ввели текст с картинки
Все поля обязательны к заполнению
Перед публикацией отзывы проходят модерацию
Не забудьте купить
Каталог
  • Только в наличии

  • Цена
    от
    до
    0 Корзина: 0 руб